Adding IP addresses - Revision history

Nic at 03:17, 28 January 2025

2025-01-28T03:17:03Z

← Older revision		Revision as of 22:17, 27 January 2025
Line 4:		Line 4:


	= ~~Steps~~ =		= Adding an IP-based IP address =

	To add ~~a new~~ IPv4-based or IPv6-based [[IP Addresses\|IP address]], follow these steps.		To add an IPv4-based or IPv6-based [[IP Addresses\|IP address]], follow these steps.

	# Click on '''IP Addresses''' on the menu in the left-hand side;		# Click on '''IP Addresses''' on the menu in the left-hand side.
	# Click on the '''Add IP Address''' button;		# Click on the '''Add IP Address''' button.
	# Enter a '''name''' for the IP address;		# Enter a '''name''' for the IP address.
	#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.		#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.
	# Enter the '''Start IP''' and '''End IP'''		# Enter the '''Start IP''' and '''End IP'''.
	#: OdataLink supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.		#: OdataLink supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.
	# Click '''Add IP Address'''		# Click the '''Add IP Address''' button.

			Once added, you will need to allow it for specific [[Models\|models]]. See [[Allowing / disallowing IP addresses access to a model]] for more information.

			= Adding a Geo-based IP address =

			To add a Geo-based [[IP Addresses\|IP address]], follow these steps.

			# Click on '''IP Addresses''' on the menu in the left-hand side.
			# Click on the '''Add IP Address''' button.
			# Enter a '''name''' for the IP address.
			#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.
			# Enter the '''Start IP''' and '''End IP'''.
			#: OdataLink supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.
			# Click the '''Add IP Address''' button.
			# Click on the '''Convert to Geo-based''' button.
			# Select the type of Geo-based validation to apply.
			# Click the '''Save' button.

	Once added, you will need to allow it for specific [[Models\|models]]. See [[Allowing / disallowing IP addresses access to a model]] for more information.		Once added, you will need to allow it for specific [[Models\|models]]. See [[Allowing / disallowing IP addresses access to a model]] for more information.

Nic at 03:11, 28 January 2025

2025-01-28T03:11:27Z

← Older revision		Revision as of 22:11, 27 January 2025
Line 1:		Line 1:
	Each [[Models\|model]] has a firewall.		Each [[Models\|model]] has a built-in firewall. The firewall secures access to the [[OData Feed URLs]] and your data.

	~~A Firewall secures access to~~ the [[~~OData Feed URLs~~]] ~~and your~~ data.		If the firewall is enabled for a model, an [[IP Addresses\|IP addresses]] will need to be added before data can be refreshed.

	~~If a firewall is enabled for a model then an [[IP Addresses\|IP addresses]] will need to be added before data can be refreshed~~

	= Steps =		= Steps =

	To add a new [[IP Addresses\|IP address]], follow these steps.		To add a new IPv4-based or IPv6-based [[IP Addresses\|IP address]], follow these steps.

	# Click on '''IP Addresses''' on the menu in the left-hand side;		# Click on '''IP Addresses''' on the menu in the left-hand side;
	# Click on the '''Add IP Address''' button;		# Click on the '''Add IP Address''' button;
	# Enter a '''~~IP Address Name~~''';		# Enter a '''name''' for the IP address;
	#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.		#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.
	# Enter the '''Start IP''' and '''End IP'''		# Enter the '''Start IP''' and '''End IP'''

Jeff at 10:13, 31 October 2022

2022-10-31T10:13:41Z

← Older revision		Revision as of 05:13, 31 October 2022
Line 1:		Line 1:
	Each [[Models]] has a firewall		Each [[Models\|model]] has a firewall.

	~~[[IP Addresses\|IP addresses]] are used as a~~ Firewall ~~to secure~~ access to the [[OData Feed URLs]] and your data.		A Firewall secures access to the [[OData Feed URLs]] and your data.

	If ~~you have your Firewall~~ enabled for a model then an IP ~~address~~ will need to be added before data can be refreshed		If a firewall is enabled for a model then an [[IP Addresses\|IP addresses]] will need to be added before data can be refreshed

	= Steps =		= Steps =

Jeff at 10:11, 31 October 2022

2022-10-31T10:11:00Z

← Older revision		Revision as of 05:11, 31 October 2022
Line 1:		Line 1:
	Each [[~~Model~~]] has ~~its own~~ firewall		Each [[Models]] has a firewall

	[[IP Addresses\|IP addresses]] are used as a Firewall to secure access to the [[OData Feed URLs]] and your data.		[[IP Addresses\|IP addresses]] are used as a Firewall to secure access to the [[OData Feed URLs]] and your data.

Jeff at 10:10, 31 October 2022

2022-10-31T10:10:43Z

← Older revision		Revision as of 05:10, 31 October 2022
Line 1:		Line 1:
			Each [[Model]] has its own firewall

	[[IP Addresses\|IP addresses]] are used as a Firewall to secure access to the [[OData Feed URLs]] and your data.		[[IP Addresses\|IP addresses]] are used as a Firewall to secure access to the [[OData Feed URLs]] and your data.

Jeff at 10:09, 31 October 2022

2022-10-31T10:09:58Z

← Older revision		Revision as of 05:09, 31 October 2022
Line 1:		Line 1:
	[[IP Addresses\|IP addresses]] are used as Firewall to secure access to the [[OData Feed URLs]] and your data.		[[IP Addresses\|IP addresses]] are used as a Firewall to secure access to the [[OData Feed URLs]] and your data.

			If you have your Firewall enabled for a model then an IP address will need to be added before data can be refreshed

	= Steps =		= Steps =

Nic at 05:02, 23 September 2021

2021-09-23T05:02:50Z

← Older revision		Revision as of 00:02, 23 September 2021
Line 1:		Line 1:
	[[IP Addresses\|IP addresses]] are used as Firewall to secure access to the [[OData Feed URLs]] and your ~~[[MYOB]]~~ data.		[[IP Addresses\|IP addresses]] are used as Firewall to secure access to the [[OData Feed URLs]] and your data.

Nic at 22:27, 13 January 2021

2021-01-13T22:27:30Z

← Older revision		Revision as of 17:27, 13 January 2021
Line 1:		Line 1:
	[[IP Addresses\|IP addresses]] are used as Firewall to secure access to the [[OData Feed URLs]] and your [[MYOB]] data.		[[IP Addresses\|IP addresses]] are used as Firewall to secure access to the [[OData Feed URLs]] and your [[MYOB]] data.


	= Steps =		= Steps =

Nic at 23:31, 15 December 2020

2020-12-15T23:31:15Z

← Older revision		Revision as of 18:31, 15 December 2020
Line 8:		Line 8:
	# Click on the '''Add IP Address''' button;		# Click on the '''Add IP Address''' button;
	# Enter a '''IP Address Name''';		# Enter a '''IP Address Name''';
	#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the ~~ODataLink~~ website. We recommend using the location of the office or the name of the user to which it applies.		#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.
	# Enter the '''Start IP''' and '''End IP'''		# Enter the '''Start IP''' and '''End IP'''
	#: ~~ODataLink~~ supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.		#: OdataLink supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.
	# Click '''Add IP Address'''		# Click '''Add IP Address'''

Nic at 03:25, 15 May 2020

2020-05-15T03:25:08Z

← Older revision		Revision as of 22:25, 14 May 2020
Line 8:		Line 8:
	# Click on the '''Add IP Address''' button;		# Click on the '''Add IP Address''' button;
	# Enter a '''IP Address Name''';		# Enter a '''IP Address Name''';
	#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the ~~odatalink~~ website. We recommend using the location of the office or the name of the user to which it applies.		#: This is the display name of the [[IP Addresses\|IP address]] and is only used within the ODataLink website. We recommend using the location of the office or the name of the user to which it applies.
	# Enter the '''Start IP''' and '''End IP'''		# Enter the '''Start IP''' and '''End IP'''
	#: ODataLink supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.		#: ODataLink supports both IPv4 and IPv6 [[IP Addresses\|IP addresses]]. The type to use and enter will depend on your network environment.