Adding IP addresses: Difference between revisions

Line 4:

= ~~Steps~~ =

= Adding an IP-based IP address =

To add ~~a new~~ IPv4-based or IPv6-based [[IP Addresses|IP address]], follow these steps.

To add an IPv4-based or IPv6-based [[IP Addresses|IP address]], follow these steps.

# Click on '''IP Addresses''' on the menu in the left-hand side;

# Click on '''IP Addresses''' on the menu in the left-hand side.

# Click on the '''Add IP Address''' button;

# Click on the '''Add IP Address''' button.

# Enter a '''name''' for the IP address;

# Enter a '''name''' for the IP address.

#: This is the display name of the [[IP Addresses|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.

# Enter the '''Start IP''' and '''End IP'''

# Enter the '''Start IP''' and '''End IP'''.

#: OdataLink supports both IPv4 and IPv6 [[IP Addresses|IP addresses]]. The type to use and enter will depend on your network environment.

# Click '''Add IP Address'''

# Click the '''Add IP Address''' button.

Once added, you will need to allow it for specific [[Models|models]]. See [[Allowing / disallowing IP addresses access to a model]] for more information.

= Adding a Geo-based IP address =

To add a Geo-based [[IP Addresses|IP address]], follow these steps.