Revision as of 22:11, 27 January 2025

Each model has a built-in firewall. The firewall secures access to the OData Feed URLs and your data.

If the firewall is enabled for a model, an IP addresses will need to be added before data can be refreshed.

Steps

To add a new IPv4-based or IPv6-based IP address, follow these steps.

Click on IP Addresses on the menu in the left-hand side;
Click on the Add IP Address button;
Enter a name for the IP address;
This is the display name of the IP address and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.
Enter the Start IP and End IP
OdataLink supports both IPv4 and IPv6 IP addresses. The type to use and enter will depend on your network environment.
Click Add IP Address

Once added, you will need to allow it for specific models. See Allowing / disallowing IP addresses access to a model for more information.

@@ Line 1: / Line 1: @@
-Each [[Models|model]] has a firewall.
+Each [[Models|model]] has a built-in firewall. The firewall secures access to the [[OData Feed URLs]] and your data.
-A Firewall secures access to the [[OData Feed URLs]] and your data.
+If the firewall is enabled for a model, an [[IP Addresses|IP addresses]] will need to be added before data can be refreshed.
-If a firewall is enabled for a model then an [[IP Addresses|IP addresses]] will need to be added before data can be refreshed
 = Steps =
-To add a new [[IP Addresses|IP address]], follow these steps.
+To add a new IPv4-based or IPv6-based [[IP Addresses|IP address]], follow these steps.
 # Click on '''IP Addresses''' on the menu in the left-hand side;
 # Click on the '''Add IP Address''' button;
-# Enter a '''IP Address Name''';
+# Enter a '''name''' for the IP address;
 #: This is the display name of the [[IP Addresses|IP address]] and is only used within the OdataLink website. We recommend using the location of the office or the name of the user to which it applies.
 # Enter the '''Start IP''' and '''End IP'''